Call us
07971191036
We are providing a wide array of Tractor Mounted Water Well Drilling Rig. It is an equipped with powerful tools and components to increase its durability. Therefore, provided rig is providing abundant verifiable potable water and helps to eliminate harmful contaminants. Tractor Mounted Water Well Drilling Rig is used to make holes in the earth's surface. It is also useful to down the hole drills when equipped with a high pressure air compressor.
| TECHNICAL SPECIFICATIONS - JST-10 TRACTOR MOUNTED SEISMIC SHOT HOLE DRILLING RIG | |
|---|---|
| DRILLING DEPTH | Maximum 4" Bore Holes, 80 Meter (262 Foot) by using 2" / 2" Drill Rods |
| PRIME MOVER | Power required for the rig hydraulic is drawn from the tractor engine through the output PTO Shaft. Suitable Tractor: 45 Hp and above |
| WORK METHOD | DTH Drilling |
| MAST | 5" Channel Structure Mast, Maximum Capacity 8 Tons, Height 2.75 Meter (9 Foot), Rod Handling 60", Centralized Opening 7" |
| PULL UP SPEED | 6.5 Meter / Min (22 Foot/Min) |
| PULL UP FORCE | 2,700 Kg / 59,400 lbs @ 140 Bar |
| PULL DOWN SPEED | 10.5 Meter / Min (34 Foot/Min) |
| PULL DOWN FORCE | 1,600 Kg / 3,520 lbs @ 140 Bar |
| HYDRAULIC SYSTEM | 140 Kg/cm (2,000 psi) |
| REEVING RATIO | 1:2 |
| ROTARY HEAD | Maximum Torque 146 Kg-Meter (12,740 lbs-inch) |
| ROTARY HEAD SPEED | 0 to 60 rpm |
| WATER INJECTION PUMP | 36 LPM, 40 Kg/cm water pump driven by hydraulic motor |
| OTHER OPTIONS | The same mast can be mounted on a small truck for easy approach to difficult site conditions. This can also be altered to drill horizontal bores up to 262 Foot. |
| SUITABLE COMPRESSOR | 450 CFM/150 psi, 450 CFM/175 psi, 600 CFM/200 psi |
| LEVELLING JACK | Four Hydraulic Leveling Jacks for accurate leveling of drill point, each having a separate lever |
Price: